Model: AAR-DVI-001-XXX

Specification:

• Product Type Features = DVI
• Size = Standard
• Number of Ports = 1
• Orientation = Right Angle
• Number of Positions = 25
• Mount Location = Top
• Termination Method = Solder
• Series = DVI-D
• Panel Ground = Without
• PCB Retention Method = Boardlocks

Electrical Requirement:

• Rating Voltage: 40V AC max.
• Rating Current: 1.5A max.
• Contact Resistance: [20] m Ohm Max(Initial), [30] m Ohm Max(Final).
• Dielectric withstanding Voltage:500VDC±50V, No creeping discharge or flashover shall occur.
• Insulation Resistance: [1000 ] M Ohm Min.

Mechanical Requirement

• Connector Mating Force: 4.5 kgf Max.
• Connector Unmating Force: 1-4 kgf Max.
• Durability: Operation Speed: [100±50] cycle/hour, Durability Cycles: 100 Cycles.
• Low Level contact resistance per 10m OHM Maximum change from initial per contact pair,All samples to be mated.
• Vibration: No electrical discontinuity greater than 1μ sec shall occur.
• Mechanical Shock: No electrical discontinuity greater than 1μ sec shall occur.
• Solder ability: Wet solder coverage: 95%Min.