Model: AAR-RJ1-010-XXX

Specification:

• Product Type = RJ11 Jack
• Jack Type = RJ11
• Number of Positions = 6
• Number of Contacts Loaded = 6
• Shielded = Without
• Jack Configuration = 1 x 1
• PCB Termination Type = Solder
• PCB Mount Angle = Side Entry, Right Angle
• PCB Mount Style = DIP
• LED's = Without
• Performance Category = Cat 3
• Grounding Options = Without
• Profile = Low

Electrical Requirement:

• Rating Voltage: 150V AC max.
• Rating Current: 1.5 Ampheres max.
• Contact Resistance: [25]Milliohms Max.(lnitial), [50]Milliohms Max.(Final).
• Dielectric withstanding Voltage: No creeping discharge or flashover shall occur.
• Current leakage: 0.5 mA max.
• Insulation Resistance: [1000 ] Mega-ohms Min.(initial), [500] Mega-ohms Min. (Final).
• Temperature Rising: 30°C Max.
  

Mechanical Requirement

• Connector Mating Force: 2.2 kgf Max.
• Connector Unmating Force: 1.5 kgf Max.
• Contact retention force: 5kgf Min.
• Durability: Operation Speed: 20±1 cycle/min.
• Durability Cycles: 1000 Cycles (Plug latch inoperative EIA-364-9C).
• Vibration: No electrical discontinuity greater than 1μ sec shall occur.
• Plug Retention Force: 2 kgf~8.9kgf.
• PCB Separation Force: 8.9kgf min.