Model: AAR-USB-500-XXX

IEEE 1394 4PIN DIP TYPE

Description:

• Series = IEEE 1394
• Gender = Receptacle
• Number of Ports = 1
• Number of Positions = 4
• Orientation = Vertical
• Contact Termination Type = Through Hole
• Termination Method = Solder
• Panel Ground = Without
• Locating Post(s) = With
• PCB Retention Method = Straight Leg
• Mount Location = Edge

Electrical Requirement:

• Rating Voltage: 30V max.
• Rating Current: 1.5 Ampheres max.
• Contact Resistance: [30] m Ohm Max(Initial), [50] m Ohm Max (Final).
• Dielectric withstanding Voltage: No creeping discharge or flashover shall occur.
• Current leakage: 2.0mA Max.
• Insulation Resistance: [100 ] M Ohm Min.
• Temperature Rising: 30°C Max.

Mechanical Requirement

• Connector Mating Force: 4.0 kgf Max.
• Connector Unmating Force: 1.0 kgf Min.
• Durability: Operation Speed: [500¡Ó50] cycle/hour.
• Durability Cycles: 1500 Cycles EIA-364-9C.
• Vibration: No electrical discontinuity greater than 0.1 or 1μ sec shall occur.
• Mechanical Shock: No electrical discontinuity greater than 0.1 or 1μ sec shall occur.
• Solder ability: The inspected area of each lead must have 95% solder coverage min.