fy
FY400, FY600, FY700, FY800, FY900
Best Choice
For Process And Temperature Control
Application: Control temperature, humidity, pressure, flow and PH.
FY series controllers are microprocessor based controllers. Which have been designed with high accuracy input, various ouput selection, useful options and good reliability at a competitive price.
FY series use "PID+FUZZY" algorithm to implement excellent contrl. the output status is display on the built in "Bar-Graph" display.
FY series not only provide the basic control output selections but also plus advanced options such as "Motor Valve Control" , "SCR/tRIAC trigger" , and "Programmable RAMP/SOAK".
FY Series support MODBUS protocol. Communication with HMI is more convenient.
New addtional HBA function with competitive price, user can upgrade system safety
easy.
Available in 5 sizes, the models and sizes are as below:
FY400: 48 x 48mm (Din 1/16) FY600/800: 48 x 96mm (Din 1/8)
FY700: 72 x 72mm (Din 3/16) FY900: 96 x 96mm (Din 1/4)
Approval & Free Power
IP65 Proof
All models get CE and UL approval.
Operate on any voltage from AC 85~265V at 50/60Hz.
DC 24V is also available(optional function).
IP65 dust & water proof is available for all modcls(optional function).
Heater Break Alarm (HBA)
MODBUS Communucation
Heater current flowing througn Ct can be displayed on controller.
If heater current is less than HBA set value, AL 1 will be activated(optional function).
FY series support both MOdbus RtU and MODBUS ASCII protocol.
Communication between controll and HMI or other equipment is more conveniet(optional function).
Autotuning(At)
Auto/Manual mode
At Function can calculate the optimize PID value for control system, without trying and error manually.
Conveniently switched vetween auto/manual output mode by clicking "A/M" key(except "FY400").
Various Indication Lamps
Bar-Graph
Real time monitor the status of output(OUt1/OUt2),At,alarm(AL1/AL2/AL3).
manuual output(MAN) and program(PRO).
Output percent displayed on the bar-graph in 10 LEDs resolution(except "fy400").
High Accuracy
Data Lock Function
Input with 14bit A/D resolution, 0.2% accuracy of FS.
Built in "AutoZero-AutoSpan" function keep good accuracy.
All parameters are seperated in 3 operation levels.
Each parameters can be hidden or locked to prevent unauthorized changes.
Features
Various I/O types
Peripheral Options
Special Application
Excellent Control
Convenient Instation
Alarm Function
Appearance
Parts Description
Symbol
Name
Function
PV
1
Measured value (PV) display
Display PV or various parameter symbols (Red)
SV
2
Setting value (SV) display
Displays SV or various parameter set value (Green)
SEt
3
Set key
Used for parameter calling up and set value registration
A/M
4
Auto/Manual key
Switches between Auto (PID) output mode and Manual output
<
5
Shift key
Shift digits when setting are changed
∨
6
Down key (Program Hold)
Decrease numbers (*Only for programmable controller)
∧
7
Up key (Program Run)
Increase numbers (*Only for programmable controller)
OUt1
8
OUt1 lamp
Lights when OUt1 is on (Green)
Symbol
Name
Finction
Out2
9
OUt2 lamp
Lights when OUt2 is on (Green)
At
10
Autotuning lamp
Lights when Autotuning is activated (Orange)
AL1
11
Alarm 1 lamp
Lights when Alarm 1 is activated (Red)
AL2
12
Alarm 2 lamp
Lights when Alarm 2 is activated (Red)
AL3
13
Alarm 3 lamp
Lights when Alarm 3 is activated (Red)
Man
14
Manual output lamp
Lights when manual output is activated (Orange)
Pro
15
*Program Running lamp
*Flashes when program running
(Only for programable controller)
Out1%
16
Output% Bar-Graph display
Output% is displayed on 10-dot LEDs
External Dimension Unit:mm
Terminal Arrangement
Specifications
Standard Spec.
Model
FY400
FY600
FY700
FY800
FY900
Dimension
48 X 48mm
96 X 48mm
72 X 72mm
48 X 96mm
96 X 96mm
Supply voltage
AC 85~265V, DC24V (Optional)
Frequency
50/60 Hz
Power Consumption
approx 3VA
approx 4VA
approx 3VA
approx 4VA
approx 4VA
Memory
Non-volatile memory EPROM
Input
Accuracy: 0.2%fs, Sample time: 250ms
TC
K, J, R, S, B, E, N, T, W5Re/W26Re, PL2, U, L
RtD
Pt100, JPt100, JPt50
mA DC
4~20mA,0~20mA
Voltage DC
0~1V, 0~5V, 0~10V, 1~5V, 2~10V
-10~10mV, 0~10mV, 0~20mV, 0~50mV. 10~50mV
DP Position
0000,000.0, 00.00, 0.000(available for mA or Voltage dc input)
Output 1
Main control output
Relay
SPSt type
SPDt type
SPDt type
SPDt type
SPDt type
3A, 220V, electrical life:100,000 times or more(under the rated load)
Voltage Pulse
For SSR drive. ON:24V, OFF:0V, maximum load current:20mA
mA DC
4~20mA, 0~20mA, Maximum load resistance:560Ω
Voltage DC
0~5V, 0~10V, 1~5V, 2~10V Maximum load current:20mA
Alarm 1
SPSt type
SPDt type
SPSt type
SPDt type
SPDt type
3A, 220V, electrical life: 100,000 times or more (under the rated load)
Control Algorithms
PID, P, PI, PD, ON/OFF(P=0), FUZZY
PID Range
P:0~200%, I:0~3600 Secs, D:0~900 Secs
Isolation
Output teminals(control output, alarm, transmission) and input terminals are isolated separately
Isolated Resistance
10MΩ or more between input teminals and case(ground) at DC 500V
10MΩ or more between output teminals and case(ground) at DC 500V
Dielectric Strength
1000V AC for 1 minute between input terminals and case(ground)
1500V AC for 1 minute between output terminals and case(ground)
Operating Temperature
0~50°C
Humudity range
20~90%RH
Weight
FY400 approx 150g, FY600/700/800 approx 225g, FY900 approx 300g
Display Height
PV:7mm
SV:7mm
PV:7mm
SV:7mm
PV:14mm
SV:10mm
PV:7mm
SV:7mm
PV:14mm
SV:10mm
Optional Spec.
Model
FY400
FY600
FY700
FY800
FY900
RAMP/SOAK
Program
2 Patterms with 8 segments each
the 2 pattems can be linked together as 16 segments use
Output2
For heating and cooling control use
Relay
SPSt type
SPSt type
SPSt type
SPSt type
SPSt type
Voltage Pulse
For SSR drive ON:20V OFF:0V maximum load current:20mA
mA DC
4~20mA, 0~20mA Maximum load resistance:560Ω
Voltage dc
0~5V, 0~10V, 1~5V 2~10V Maximum load current:20mA
Alarm 2
SPSt type
SPDt type
SPDt type
SPDt type
SPDt type
Alarm 3
X
SPSt type
SPSt type
SPSt type
SPSt type
Heater Break Alarm (HBA)
Display Range of Heater Current:0.0~99.9A, Accuracy:1%FS
Included Ct: SC_80_t(0.0~80.0A)
Alarm Relay: AL1
Transmission
Available for PV or SV transmission
mA DC
4~20mA, 0~20mA, Maximum load resistance: 560Ω
Volatge DC
0~5V, 0~10V, 1~5V, 2~10V Maximum load current: 20mA
Remote SV Input
4~20mA, 0~20mA, 0~5V, 0~10V, 1~5V, 2~10V are available
Communication
Protocol: MODBUS RtU, MODBUS ASCII, tAIE
Interface: RS232, RS458, ttL
Baudrate: 38400, 19200, 9600, 4800, 2400bps.
Data bits: 8, Start bit: 1, Stop bit: 1 or 2, Odd or Even parity
Water Proof/Dust Proof
IP65
Order Information
Model & Suffix codes
Combination of Options and Models
Available
Not Availalbe
PAMP/SOAK
PROGRAM
Output 1
1ΦSCR_Z
3ΦSCR_Z
Motor valve control
3ΦSCR_P
3ΦSCR_P
FY400
FY600
FY700
FY800
FY900
Output 2
Alarm 2
Alarm 3
HBA
TRS
Remot
SV
Communication
Power
DC 24V
Input type table
Type
Code
Ragne
Type
Code
Ragne
K
K1
01
0.0~200.0°C (392.0°F)
k2
02
0.0~400.0°C (752.0°F)
K4
04
0~800.0°C (1472°F)
k5
05
0~1000°C (1832°F)
J
J1
07
0.0~200.0°C (392.0°F)
J2
08
0.0~400.0°C (752.0°F)
J4
10
0~800.0°C (1472°F)
J5
11
0~1000°C (1832°F)
R
R1
13
0~1600.0°C (2912°F)
R2
14
0~1769°C (3216°F)
S
S1
15
0~1600.0°C (2912°F)
S2
16
0~1769°C (3216°F)
B
B1
17
0~1820.0°C (3308°F)
E
E1
18
0~800.0°C (1472°F)
E2
19
0~900°C (1652°F)
N
N1
20
0~1200.0°C (2192°F)
N2
21
0~1300°C (2372°F)
T
T1
22
-199.9~400.0°C (752.0°F)
T2
23
-199.9~200.0°C (392.0°F)
W
W1
25
0~2000°C (3632°F)
W2
26
0~2320°C (4208°F)
PLII
PL1
27
0~1300°C (2372°F)
PL2
28
0~1390°C (2534°F)
U
U1
29
-199.9~600.0°C (999.9°F)
U2
30
-199.9~200.0°C (392.0°F)
L
L1
32
0~400°C (752°F)
L2
33
0~800°C (1472°F)
JPT
100
JP1
41
-199.9~600.0°C (999.9°F)
JP2
42
-199.9~400.0°C (752.0°F)
JP4
44
0~200°C (392°F)
JP5
45
0~400°C (752°F)
PT
100
DP1
47
-199.9~600.0°C (999.9°F)
DP2
48
-199.9~400.0°C (752.0°F)
DP4
50
0~200°C (392°F)
DP5
51
0~400°C (752°F)
JPT
50
JP.1
53
-199.9~600.0°C (999.9°F)
JP.2
54
-199.9~400.0°C (752.0°F)
JP.4
56
0~200°C (392°F)
JP.5
57
0~400°C (752°F)
Type
Code
Ragne
k3
03
0~600°C (1112°F)
k6
06
0~1200°C (2192°F)
J3
09
0~600°C (1112°F)
J6
12
0~1200°C (2192°F)
T3
24
0.0~350.0°C (662.0°F)
U3
31
0.0~400.0°C (752.0°F)
JP3
43
-199.9~200.0°C (392.0°F)
JP6
46
0~600°C (1112°F)
DP3
49
-199.9~200.0°C (392.0°F)
DP6
52
0~600°C (1112°F)
JP.3
55
-199.9~200.0°C (392.0°F)
JP.6
58
0~600°C (1112°F)
Type
Code
Range
AN1
61
-10~10mV
-1999~9999
or
-199.9~999.9
or
-19.99~99.99
or
-1.999~9.999
62
-2~2V
63
-5~5V
64
-10~10V
AN2
71
0~10mV
AN3
76
0~20mV
AN4
81
0~50mV
82
0~20mA
83
0~1V
84
0~5V
85
0~10V
86
0~5K ohm
87
0~2V
AN5
91
10~50mV
92
4~20mA
93
1~5V
94
2~10V